- Joined
- Apr 6, 2010
- Messages
- 10,237
- Reaction score
- 38,518
Here are the coordinates of the area where there was a partial road closure yesterday. 34.8035660, -115.6121430. In google maps you need to turn on the layer for Traffic to see the traffic flow.
To add more specifics to Claire's post for those not familiar with google maps, click on the link I've attached below. Go to the top left corner and click on the menu icon (3 horizontal lines) and a sidebar will pop out. Look down the list for 'traffic' and you can click on it to toggle the traffic layer on and off.
Note: As I type this, there is no traffic data showing up at that particular location (perhaps due to no traffic at all at this very early hour), but it was showing up yesterday and I expect it will show up later. If you zoom out and look to the south at I-40 you can see the green/yellow/red traffic lines and that will confirm that you have the traffic layer turned on. You'll have to zoom back in to the original spot to monitor when the traffic flow info shows up.
https://www.google.ca/maps/place/34°48'12.8"N+115°36'43.7"W/@34.802126,-115.6119017,15.83z/data=!4m5!3m4!1s0x0:0x0!8m2!3d34.803566!4d-115.612143!5m1!1e1?hl=en