They took off and climbed to 7000' with 15°. When they leveled off at 7K' (at 7:40:37) they changed to 30°. Said they intended to be about 160KIAS.
At 7:42 they were 14nm out of SEATAC, at 7K', had 30° flaps, and were at "approach" speed. At 7:44:22 they reported the stair down. At 7:45 they were 19nm out of SEATAC and still at 7K'. At 7:48: 160KIAS, at 7K', GOING TO 15° AND STARTING THEIR CLIMB.
7:50:05 Toledo gave them altimeter setting 29.98" Hg.
7:51:31 "through 9K' now"
7:53:34 Leveling at 10K'
7:53:40 170 to 180 KIAS.
They reported 15K' and immediately corrected. They were actually at 10K'.
I don't understand what you mean. The transcript has air traffic control verifying the flight is assigned 10K' at 7:37:17.
"Turnkey" for beginners. You're making great progress.
I am going by my time, sorry should have said that, Hominid said they took off at 36 minutes past the hour, I read the transcript again and see my mistake, I was thinking they said 1000 and not the assigned 10,000 :blushing:
nevertheless, I have been taking off at 7:36 and 30 seconds and arriving at Toledo via V 23 at 23/24 minutes after take off. airspeed about 160/170
I need to make a flight check list, just flying the plane in this configuration needs a constant visual out the window, the plane drags and wants to go down, if I divert attention away from flying, I am all over the place :floorlaugh:
I am completely amazed on how well this system is working speed, locations
GPS maps, even gives me a Vector to follow on my map, I have 95% control of all instrumentation on the plane, not to much is a "dummy switch" extremely realistic.
much like Cooper, I can not get the aft stairs down on the dreamfleet, I can lower them on the first part of the software, it tells you how to do it but, nothing happens, I'm wondering if it has something to do with my wireless keyboard, to lower the stairs you hit shift + E at the same time, then 2, might be to much on the board commands for wireless?
I will take a screen shot just over Merwin Lake, there is not a lot of room to go back and forth (east/west) from the view at 10,000.
I am slowly learning how to manually start and stop the engines, lots to learn on that which can be done later, well, off to fly another shift :rocker: