- Joined
- Sep 11, 2024
- Messages
- 2,450
- Reaction score
- 29,670
For clarity.
Red lines indicate trim lines where sheet metal ends & plastic begins & is symmetrical on driver & passenger side. Area marked in green will NOT be different from 2011-2016 on a factory body. Area below the red lines WILL be potentially different but MUST match up to that red line. For sake of clarity & argument, let’s refer to the front & rear plastic bumper coverings as fascias. The fascias are where things will typically differ. Wheels/tires are of zero consequence because they are independent of the sheet metal & easily swapped as long as they fit & clear the wheel well openings & brakes/suspension. Any splash guards will likely be attached (screws/bolts) & not part of the fascia. The INSIDES (bulbs, coloration, bulb locations or array/pattern) of the lights, front or rear, can be different but the exterior shell (lens) & outline must match the original silhouette or body opening(s) (cutouts).


JMO
Red lines indicate trim lines where sheet metal ends & plastic begins & is symmetrical on driver & passenger side. Area marked in green will NOT be different from 2011-2016 on a factory body. Area below the red lines WILL be potentially different but MUST match up to that red line. For sake of clarity & argument, let’s refer to the front & rear plastic bumper coverings as fascias. The fascias are where things will typically differ. Wheels/tires are of zero consequence because they are independent of the sheet metal & easily swapped as long as they fit & clear the wheel well openings & brakes/suspension. Any splash guards will likely be attached (screws/bolts) & not part of the fascia. The INSIDES (bulbs, coloration, bulb locations or array/pattern) of the lights, front or rear, can be different but the exterior shell (lens) & outline must match the original silhouette or body opening(s) (cutouts).


JMO